A thermoplastic elastomer with a hardness of 40D in Shore scale, which may be printed at speeds up to 45 mm/s. The rubbery-like material can be extended up to 680% of its original dimensions. Moreover, it has a high impact resistance at low temperatures and is resistant to abrasion, and has a very good chemical resistance. All material properties give the opportunity to use it in places that require frequent bending, in gadgets as well as rubber parts of machines and joining elements.
Red & Yellow are a different price due to weight difference*
Net weight: 0.5 kg | 1.1 lbs
Diameter: 1.75 mm
Net weight: 0.85 kg | 1.87 lbs
Printing temperature: 190°C — 210°C
Bed temperature: 50°C — 70°C (when using plates or other means to increase the adhesion, the heating of the bed is not required)
Diameter tolerance: +/- 0.05 mm
Oval tolerance: +0.03 mm
Additional information:
Printing speed up to 45 mm/s with a direct extruder
can be printed with Bowden style extruder at speed 15-30 mm/s
to remove the print easier, it is recommended to heat the bed to 110°C